Caskade Phosbright 60 Acid Detergent Descaler Cleaner (C31) 5L

Description:

Phosbright 60 removes water hardness, milkstone deposits and sanitises in one operation. It also removes surface rust from ferrous metals and protects against subsequent re-rusting.

Phosbright 60 may be used with CIP equipment, spray systems, soak tanks or manually.
Phosbright 60 contains over 60% phosphoric acid, wetting agents, and 2.0% alkyl benzyl dimethyl ammonium chloride minimum.
Wear gloves, eye protection and protective clothing.
Phosbright 60 may be identified by its clear pink appearance, pH of 0-2, density greater than 1.30 Kg/L, and a minimum of 600g/L phosphoric acid by titration.

Directions for use:

Scale Removal: Dilute to 2% (20mL/litre or 1:50) to remove water hardness deposits or milkstone in CIP systems.
Circulate at 60°C for 30 minutes then rinse. Cooler water may be used with higher concentrations or longer contact times. Rinse with cold water.

Automatic Dishwashers are best de-scaled by shutting off the automatic feed, dosing as above (20mL/litre), then running for 15 minutes.
Where circulation is not possible scale removal may be accelerated by using hotter water, longer reaction times, or by scrubbing.

Rust Removal: Neat or diluted up to 30% (300ml/litre).
Apply to surface for 5 - 30 minutes. Rinse with cold water.

Hooks, Slides and Gambrels: Use at 7% minimum at 80-90C for 5-10 minutes when part of a 5 bath system.

Health & Safety:
If poisoning occurs contact a doctor or Poisons
• Information Centre. Phone New Zealand 0800 764 766.
• If aspirated into the lungs, remove from exposure.
• If swallowed, do NOT induce vomiting, give water to drink and seek medical attention.
• If in eyes, hold eyes open, and flood for at least 15 minutes and see a doctor.
• If skin or hair contact occurs, remove contaminated clothing and wash skin thoroughly with water.
24 Hour toll free emergency phone no: 0800 243 622