Hydroforce Truckmount Descaler 2lb jar

The Hydro-Force Truckmount Descaler is a descaling system that effectively descales the toughest jobs.
This will remove scale and deposits from your truckmount so it can run more efficiently.

Benefits 
 -REMOVES THE TOUGHEST SCALE – our Truckmount Descaler is a perfect blend of acidity and surfactancy to allow the descaler to penetrate deeply into built-up scale and remove even the toughest buildup.
- LOW COST - concentrated powder means you use less and save money.               

DIRECTIONS:
1. Disconnect truckmount water inlet and solution outlet hoses.
2. Drain enough water from the truckmount water box to allow enough space to empty the entire container of Truckmount Descaler Step 1 into the water box. There must be enough liquid to allow the Step 1 powder to mix and become liquid, and for a gallon of Step 2 to be added last as a neutralizer. An appropriate amount for most truckmounts is a half-full water box.
3. Run truckmount to warm water (not hot).
4. Slowly sprinkle 2 pounds (entire bottle) of Truckmount Descaler Step 1 into waterbox to dissolve while truckmount is running.
5. Let truckmount run for 15 to 30 minutes (depending on severity of scale) to release scale from metal parts. 
6. Flush with clear water for five minutes after starting release of neutralized wastewater.