Diversey Taski TAPI Shampoo C2C 5L 101100200

Description
Concentrated carpet shampoo for the intermediate cleaning of all types of carpet and upholstery. Incorporates the new "ONT" air neutralising technology for effective malodour neutralisation and long-lasting fragrance.

Key properties
• Special combination of effective high foaming surfactants
• Residues are easily removed by vacuuming
• pH neutral, endorsed by the Woolsafe Institute
• Suitable for any carpet shampoo methods
• Incorporates "ONT" air neutralising technology
• Efficiently deactivated house dust mite allergens

Benefits
• Excellent cleaning performances
• Reduces re-soiling of the carpet
• Safe to use on any carpet types including wool
• Can be used for dry and wet shampooing as well as for the carpet pad method
• Neutralises malodour molecules and therefore enhances the perfume effect
• Tested by independent laboratories for allergens reduction


Carpet Shampoo Directions for use Dry foam & Wet shampoo method:
300ml for 10L of water (1:33). Increase to 1000ml (1:10) for heavy soiling

Carpet pad method: 200ml for 10L of water (1:50)

Encapsulation method : 800ml for 10L of water (1:12.5)

1. Dry foam method:
1. Vacuum carpet and remove spots with TASKI® General Purpose Spotter.
2. Using a single disc machine with foam generator and dry foam shampoo brush, dose the product into the full water tank.
3. Adjust foam generator to produce the foam in required dryness and shampoo the carpet.
4. Lift the carpet pile with a carpet brush while still damp to accelerate drying.
5. Allow the treated carpet to dry, then thoroughly brush vacuum to remove the crystallised shampoo residues.
6. Shampoo upholstery with the hand brush, allow to dry and thoroughly vacuum.


2. Wet shampooing:
1. Using a single disc machine, tank and wet shampoo brush, release product directly on the floor and shampoo the carpet immediately.
2. Lift the carpet pile with a carpet brush while still damp to accelerate drying.
3. Allow the treated carpet to dry, then thoroughly brush vacuum to remove the crystallised shampoo residues.
4. Shampoo upholstery with the hand brush, allow to dry and thoroughly vacuum. 


3. Carpet pad method:
1. Using a single disc machine and a carpet pad, spray product sparingly onto the carpet and the carpet pad.
2. Work all areas systematically in overlapping passes.
3. Change or turn carpet pad when saturated with dirt.


4. Encapsulation method:
1. Dilute the product with water in the encapsulation cleaner.
2. Press the proper Encapsulation settings on the machine to begin the encapsulation procedure.
3. Immediately begin to walk backwards at a slow walking speed, moving the machine over the carpet. Overlap slightly with each pass.
4. Allow carpet to dry, then vacuum . • This product is also suitable for the Bonnet method.